Plate vibrator VP480 B
MACHINES FOR CONTRACTOR WORK
For more than 45 years, we have developed and manufactured quality machines for projects we have carried out. This means that today we can offer machines that are extremely efficient and with a long service life.
Below you will find machines for the Contractor - the gardener and the municipality
They are manufactured with a focus on safety, efficiency and sustainability, as our machines last for many years.
Click on the different machines to see what we can offer
of solutions.
Plate vibrator VP480 B
.jpg)
Plate vibrator VP 480 B
The machine is used for compacting surfaces and has a high compaction effect.
Work weight | 98 kg |
Height | 1050 mm |
Plate width | 500 mm |
Plate length | 550 mm |
Impact force | 22,5 kN |
Vibration frequency | 66,6 Hz |
Vibration depth | 35-40 cm |
Driving speed | 22 m/min |
Capacity | 600 m2/t |
Water tank (optional) | 7,5 ltr |
ENGINE:
Subaru / Worms brand. Can also be delivered with Holda GX160 engine.
Type EX 17, four-stroke, air-cooled, single-cylinder.
Volume 197 cm³
RPM 3600 rpm
Power 5.7 HP / 4.2 kW
Sound pressure level was measured at 92.6 dB (A). Hearing protection is therefore required.
Start method Recoil
Fuel Petrol, 4.3 ltr. Lead-free.
Engine oil 0.7 ltr. 15-40W
VIBRATIONS:
The vibration level of the machine is measured on the control handle during normal operation.
Result 2.9 m / sec2.
NOISE:
The noise of the machine is measured at a height of 1.70 m and in a position where the operator will be in normal use of the machine. The A-weighted sound pressure level was measured at 92.6 dB (A). Hearing protection is therefore required.
Accesories
-Vibrationsmåtte
-Kørehjul
-Vandtank
ENTREPRENeur MAchines
