Put the turbo on the weed control
The TURBO blower ensures very high combustion efficiency, as well as a high turbulence and air speed, which provides an efficient heat transfer on the weeds and thus a fast blanching, regardless of which surfaces need to be freed of weeds.
A treatment with the ZACHO high-temperature hot air system shows a convincing result after just a few days.
Our weed blanching machines are commonly called UKBs.
This method of weed control is very special as it operates at up to 800 degrees, hot air that gives you a higher operating speed.
Its powerful fan allows the hot air to get well under the leaves and gives an effective result, while ensuring the much greater safety against fire danger.
With a UKB you get a product that is built to last for many years, we have machines that after 18 years still run without changing the fuel box and guns.
At the same time, you completely save on the use of chemicals to get rid of the weeds.
Our UKBs last unbelievably long. We do not know exactly how long, but we have machines that have been running for 18 years and are still running.
Click on the different machines to see what we can offer of solutions within weed blanching.
UKB 1400 Weed control machine
is our largest machine in weed blanching, and it is fitted with tool carriers or other types of machines..
Areas of application:
• Cobblestone pavement
• Parking spaces
ZACHO High temperature hot air system:
• No chemicals or toxins
• reduced fire risk
Fast and efficient heat transfer Oblique position for efficient curb treatment
The machine is used for blanching weeds on fortified areas, including substrates of asphalt, concrete, gravel and other forms of heat-resistant coating.
The machine is used along curbs, on sidewalks, paths, bike paths, walkways, as well as pouring systems and around signs.
Pay attention to the surroundings where you blanch. It can be very dry with the risk of ignition of grass / leaves or where there has been spillage of combustible material such as oil and the like.
The machine must not be used in enclosed spaces.
UKB 1400 is based on a high-temperature hot air system. The air is sucked in through the blowing housing mounted on the engine and is fed via blowing hose to the cannon's combustion chamber, where the ignited gas is mixed with a large amount of air, which ensures a very high combustion efficiency.
Since the combustion chamber is located in the upper part of the cannon, only the heated air is blown out through the cannon and down into the heat shield, where it is forced out in front of the machine due to the amount of air g thereby heating the area in front as a result of this pre-heating ensures a high and efficient working speed when the weeds are "blanched" in seconds later
The construction of the cannon does not cause any danger of burns when touched or set on fire when the machine is in use
Effective around signs, lampposts and benches etc. due to the hot air fan in front of the machine.
Safe and easy operation with "Quick on / off function".
Electronic continuous ignition (ie ignition constantly during operation) and automatic gas shut-off at stop. No flammable gas / air mixture outside the equipment due to the air-based system with large excess air.
With Quick on / off function, the equipment is particularly suitable for "interval treatment", which saves a lot of gas
Working speed 0p to 6 km h
Working width 1400 mm
Performance up to 9000 m2 / hour
Gas 4 x 11 kg
Nominal gas consumption 20 to 40 kg / Ha
Blowing capacity 800-1000 m3 / hour
Gas approval, DG3503
Weight 290 kg
Width 1400 mm
Length 1550 mm
Height 1000 mm